Pemanfaatan Limbah Fly Ash Pada Beton Mutu Tinggi Sebagai Bahan Tambah Pada Campuran Beton

Muhammad Andi Rizki Ferdiansyah, Nurul Rochmah

Abstract


Concrete with a compressive strength of more than 41.4 MPa is known as high strength concrete. High strength concrete is often used for precast concrete, especially for the construction of buildings, bridges, and also roads with wide spans. One of the materials used in this research is the addition of fly ash for concrete mixtures. Fly ash also has pozzolanic properties when mixed with other concrete mixtures. This research aims to analyze each proportion of fly ash used and also to determine the effect of using fly ash added materials, especially for compressive strength tests on high-quality concrete. In this study, fly ash was used with proportions of 0%, 5%, 10%, 12%, 15%, 20% using wcr 0.32 and also 0.4% superplasticizer level used. One of the tools used in this test is a cylindrical tube which has a size of 15 x 30 cm. Based on the research that has been done, the highest result for the test is 52.01 MPa for a percentage of 10% in 28 day concrete. It can be concluded that using fly ash material can increase the compressive strength of concrete by up to 10%, but the proportion above 10% decreases the compressive strength of concrete.

Keywords


High Strength Concrete, Fly Ash, Compressive Strength Concrete

Full Text:

PDF

References


ACI Committee 226. (1988). Use of Fly Ash in Concrete. Farmington Hiills.

Ahmad, J., Arbili, M. M., Majdi, A., Althoey, F., Deifalla, A. F., & Rahmawati, C. (2022). Performance of concrete reinforced with jute fibers (natural fibers): A review. Journal of Engineered Fibers and Fabrics, 1–17. https://doi.org/https://doi.org/10.1177/15589250221121871

Ahmad, J., Majdi, A., Deifalla, A. F., Isleem, H. F., & Rahmawati, C. (2022). Concrete Made with Partially Substitutions of Copper Slag (CPS): State of the Art Review. Materials, 15(15), 1–28. https://doi.org/https://doi.org/10.3390/ma15155196

Apriwelni, S., & Bintang Wirawan, N. (2020). Kuat Tekan Beton Mutu Tinggi dengan Memanfaatkan Fly Ash dan Bubuk Kaca Sebagai Bahan Pengisi. JURNAL SAINTIS,20(01). https://doi.org/10.25299/saintis.2020.vol20(01).4846

ASTM C33: Standard Specification for Concrete Aggregates. In ASTM.

Handayani, L., Aprilia, S., Rahmawati, C., Aulia, T. B., & Ludviq, P. (2022). Sodium Silicate from Rice Husk Ash and Their Effects as Geopolymer Cement. Polymers, 14(14), 2920.

Meliyana, M., Rahmawati, C., & Handayani, L. (2019a). Sintesis Silika Dari Abu Sekam Padi Dan Pengaruhnya Terhadap Karakteristik Bata Ringan. Elkawnie, 5(2), 164–175.

Meliyana, M., Rahmawati, C., & Handayani, L. (2019b). Sintesis Nano Silika dari Abu Sekam Padi Dengan Metode Sol-Gel. Seminar Nasional Multi Disiplin Ilmu Universitas Asahan Ke-3, 800–807.

Nugraha, P. (2007). Antoni. In Teknologi Beton.

Rahmawati, C., Aprilia, S., Saidi, T., & Aulia, T. B. (2021). Mineralogical, Microstructural and Compressive Strength Characterization of Fly Ash as Materials in Geopolymer Cement. Elkawnie, 7(1), 1–17.

Rahmawati, C., Aprilia, S., Saidi, T., Aulia, T. B., Amin, A., Ahmad, J., & Isleem, H. F. (2022). Mechanical properties and fracture parameters of geopolymers based on cellulose nanocrystals from Typha sp. fibers. Case Studies in Construction Materials, 17, e01498.

Rahmawati, C., & Meliyana, M. (2019). Potensi Limbah Karbit Sebagai Pengganti Semen Pada Bata Ringan. Seminar Nasional Multi Disiplin Ilmu Universitas Asahan, 627–635.

SNI 03-1974-1990. Cara Uji Kuat Tekan Beton Dengan Benda Uji Silinder. Badan Standarisasi Nasional (BSN).

SNI 03-2834-2000: Tata cara pembuatan rencana campuran beton normal. Sni 03-2834-2000.

SNI 03-6468-2000. Perencanaan Campuran Tinggi Dengan Semen Portland Dengan Abu Terbang. Badan Standarisasi Nasional (BSN).

SNI 1969-2008. Cara Uji Berat Jenis dan Penyerapan Air Agregat Kasar. Badan Standar Nasional Indonesia.

SNI 2460:2014. (2014). Spesifikasi Abu Terbang Batubara Dan Pozolan Alam Mentah Untuk Digunakan Dalam Beton. Badan Standarisasi Nasional (BSN).

Tjokrodimuljo, K. (2007). Teknologi Beton. Universitas Gadjah Mada, Yogyakarta: Biro Penerbit Teknik Sipil Keluarga Mahasiswa Teknik Sipil Dan Lingkungan.

Trimurtiningrum, R., & Subakti, A. (2017). Compressive Strength and Shrinkage Test of Flowing Concrete Using Fly Ash and Naphtalene-Based Superplasticizer. 445–454. https://doi.org/10.1007/978-3-319-56062-5

Wibawa, T. A. (2014). Pengaruh Penambahan Fly Ash Terhadap Kuat Tekan Beton.

Yusra, A., Aulia, T. B., & Jufriadi, J. (2018). Pengaruh Bahan Tambah Fly Ash Batu Bara Terhadap Kuat Tekan Beton Mutu Tinggi. Jurnal Teknik Sipil Dan Teknologi Konstruksi,1(1). https://doi.org/10.35308/jts-utu.v1i1.717




DOI: https://doi.org/10.30601/jtsu.v9i1.3059

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Muhammad Andi Rizki

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Jurnal Teknik Sipil Unaya


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

© Jurnal Teknik Sipil Unaya : Published by Center for Research and Community Service (LPPM) University of Abulyatama, Aceh, Indonesia. 2019