Pemodelan Beban Pada Struktur Dermaga Multipurpose dengan SAP2000

Budiono Joko Nugroho, Hartono Hartono

Abstract


A wharf is a building in a port that is made to moor or close ships that will unload or load goods and unload ferries. This research focuses on modeling the multipurpose wharf structure. The structure of the Deck on Pile wharf is designed to be strong against loads that work either or from areas that include wind, waves, currents, earthquakes and loads due to activities at the pier including ship collision loads (berthing), mooring, loads and vehicles. In this study, trying to analyze on field conditions including information on hydrooceanography, topography, bathymetry, ship design information and pier design. The design of the wharf structure includes the size of the structure, analysis of the strength of structure using the SAP2000 software.

Keywords


Dermaga, Deck on Pile, SAP2000

Full Text:

PDF

References


B. Triatmojo, Perencanaan Pelabuhan.

Yogyakarta: Beta Offset, 2009

British Standards Code of Practice for Maritime Structures, BS 6349 Part 1-7

Guidelines for the Design of Fenders Systems : 2002, PIANC

POLB 2009, Port on Long Beach – wharf design version 4.0

Standar Desain Fasilitas Pelabuhan Regional. 2015. Direktorat Jenderal Perhubungan Laut Kementerian Perhubungan Republik Indonesia

SNI 1726-2019 : Tata cara Perencanaan Ketahanan Gempa untuk struktur Bangunan Gedung dan Non-Gedung

SNI 1727-2019 : Beban Minimum untuk Perancangan Bangunan Gedung dan Struktur lain.

SNI 2847-2019 : Tata Cara Perhitungan Struktur Beton untuk Bangunan Gedung

SNI 8460:2017 : Persyaratan Perancangan Geoteknik

The Overseas Coastal Area Development Institute of Japan. 2002. Technical Standards and Commentaries for Port and Harbour Facilities in Japan.

Apriani, W. (2016). Aplikasi Non Destructive Test Pada Investigasi Keandalan Struktur Struktur Beton. Siklus, 2(2), 95–103.

Rahmawati, C., Zainuddin, Z., Is, S., & Rahim, R. (2018). Comparison between PCI and Box Girder in BridgesPrestressed Concrete Design. Journal of Physics: Conference Series, 1007(1). https://doi.org/10.1088/1742-6596/1007/1/012065

Rahmawati, Cut, & Zainuddin, Z. (2016). Analysing The Route Of PCI Girder-Type Prestressed Concrete Tendons. International Journal of Science and Research (IJSR), 5, 1553–1559.

Tawekall, R. L., Baskara, A. R., & Adriadi, R. (2004). Studi Kehandalan Struktur Anjungan Lepas Pantai Tipe Brace Monopod. Jurnal Teknik Sipil, 11(4), 179–190.




DOI: https://doi.org/10.30601/jtsu.v8i1.2632

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Budiono Joko Nugroho

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Jurnal Teknik Sipil Unaya


Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

© Jurnal Teknik Sipil Unaya : Published by Center for Research and Community Service (LPPM) University of Abulyatama, Aceh, Indonesia. 2019